Filter
Top Products
52
5
Useful functions
Setting the date and time
This function lets you set the date and time. The date and time is saved
with each picture, and is used in the file name.
[X] i g“How to use the menus” (P. 14)
1 Press [\ to select one of the
following date formats: [Y-M-D]
(Year/Month/Day), [M-D-Y]
(Month/Day/Year), [D-M-Y] (Day/
Month/Year), and press
]
.
• Move to the year setting.
• The following steps show the procedure
used when the date and time settings
are set to [Y-M-D].
2 Press [\ to set the year, then
press
]
to move to the month
setting.
• To move back to the previous setting,
press ^.
• The first two digits of the year are fixed.
3 Repeat this procedure until the
date and time are completely set.
• The time is displayed in the 24-hour
format. Consequently, 2 p.m. is displayed as 14:00.
4 Press i.
• For a more accurate setting, press i when the time signal hits 00 seconds.
• Press to exit the menu.
Note
• The date and time settings will be returned to the factory default settings if the
camera is left without batteries for approximately 1 day. The settings will be
canceled more quickly if the batteries were only loaded in the camera for a
short time before being removed. Before taking important pictures, check that
the date and time settings are correct.