Filter
Top Products
167
Using the Setup menu
This section explains the general procedure for using the Setup menu. For details
about the available settings, refer to the explanations provided later in this chapter.
1 Set the mode dial to .
• The camera enters SETUP mode and
displays the first page of the Setup menu.
2 Use or to move the menu pointer to
the appropriate line on the menu.
(In the example in diagram “2”, the beep
function
[]has been selected.)
• The selected line is highlighted in green.
• The current setting is shown in brackets.
3 Press .
• The monitor displays the available settings.
4 Use or to move the pointer to the
desired setting.
(In diagram “4” at left, the beeper is being
switched OFF.)
• The selected setting is highlighted in green.
5 Press the OK button.
• The new setting becomes effective, and the
Setup menu reappears.
6 The brackets now show the new setting.
• Confirm that this setting is correct. If you
wish to access another item on the menu,
return to Step 2 above. When you are
finished with the Setup menu, turn the mode
dial to a different mode.
8
Customizing the Environment
[
1/2
]
CHANGE
[
ON
]
[
ON
]
[
LOW
]
[
NAME RESET
]
FILE
OK
SET
BACK
OFF
LOW
HIGH
[
1/2
]
CHANGE
[
ON
]
[
ON
]
[
OFF
]
FILE
[
NAME RESET
]
2 3 4
1 6
5
Menu pointer First of 2 pages.
2
4
6