Filter
Top Products
Inserting Batteries
The camera accepts four AA (R6) batteries (alkaline, NiMH, lithium, or NiCD) or two
CR-V3 lithium battery packs. Four AA (R6) alkaline batteries are included with the
camera.
Do not mix different types of batteries, never use manganese batteries, and always be
sure to insert the batteries in the correct direction. Manganese batteries, mismatched
batteries, or incorrectly inserted batteries may overheat and cause irreparable damage
to the camera.
1 Be sure that the mode dial is set to the
OFF position.
2 Push the stopper in the direction shown in
the diagram.
The battery case pops out.
3 Pull the case out of the camera.
4 Insert the batteries or battery packs into
the case.
Be sure to insert in the correct direction.
Insert battery packs black-band first, with the
CAMEDIA label facing up.
28
2
3
CR-V3
CR-V3
CR-V3 lithium battery packsAA batteries
Some battery packs
come with an insulation
seal covering the battery
terminal. Please remove
this seal before inserting
the pack.
Do not remove
the silver seal.