Filter
Top Products
37
1
Getting Started
5 Set the mode dial to PRINT ( ).
• The monitor displays the screen shown at
left (with the EJECT line selected).
• New film packs include a light-blocking cover
sheet. You need to eject this sheet before
you can print.
• If you have not yet loaded a SmartMedia
card (or if the card is loaded incorrectly) the
monitor displays the NO CARD message.
Load a card before proceeding (see
page 32).
6 Press the OK button.
• The camera begins ejecting the cover sheet.
If you have not yet taken any pictures, the
monitor displays the NO PICTURES
message.
• Don’t try to pull the sheet out while ejection
is in progress (while the motor is running
and the sheet is moving).
7 When the motor stops and the cover sheet
stops moving, remove the cover sheet
from the print outlet.
OK
ENTER
EJECT
CANCEL
EJECT THE
FILM COVER
6
Loading a Film Pack (continued)
Monitor
(Eject the film cover screen)