Filter
Top Products
36
1 Be sure that the mode dial is set to the
OFF.
2 Raise the film compartment latch.
• The compartment cover opens.
• The latch is purposely designed to be
somewhat tight so as to prevent accidental
opening of the compartment.
3 Hold the film pack at the thick end, with
the embossed arrows pointing into the
compartment (with the soft cover side
facing into the camera). Slide the pack all
the way in along the metal guides on the
inside of the cover, until the bottom of the
pack makes contact with the bottom of the
compartment.
• If the film pack does not insert easily, do not
try to force it. Take it out, be sure that it is
oriented correctly and that the entry path is
clear of foreign matter, and then try loading
it again.
4 When the film pack is all the way in, close
the compartment cover.
• To lock the cover in place, press inward at
the center of the cover’s upper label.