Filter
Top Products
55
2
The Basics
Printing Stills on Instant Film
Now select one of the stills that you like, and print it out.
1 Set the mode dial to PRINT ( ).
• The camera enters PRINT mode. The
PRINT-mode screen appears, and the
monitor displays the last image that you
took.
• If the camera is unable to print, it displays
an appropriate message (see page 200).
2 Select the still that you want to print.
: Move to the previous image.
: Move to the next image.
: Move back 10 images.
: Move forward 10 images.
3 Press the Print button ( ).
• The monitor displays a confirmation screen.
4 Press the Print button again.
• The camera prints the selected image onto
instant film. The green lamp begins blinking.
After a while the film begins to emerge from
the print outlet.
5 When the film stops moving and the motor
goes off, grasp the leading edge of the
film and pull the film completely out of the
print outlet.
• Allow 30 to 90 seconds for the image to
appear on the film.
HQ
123
10 REMAIN
Monitor (Print-mode screen)
Remaining film count
3 4
2
PRINT
CANCEL
[
]
Monitor (Confirmation screen)
Green
lamp