Filter
Top Products
200
Error Messages
The monitor displays a variety of messages to alert you about important conditions.
Message Problem Correction
No card in camera.
Card is inserted incorrectly.
Insert a card.
Remove and reinsert the card.
The card has no room for more
images. (The remaining picture
count is 0.)
Use a different card, or erase
some or all of the images on
the existing card. (You may
want to transfer images to your
computer before erasing.)
The card is protected by a
write-protect seal.
If you are sure you wish to write
to this card, remove (and
discard) the seal.
The camera is unable to read,
write, or erase the card.
Remove the card, wipe its
contact surface (the metal area)
with a lint-free cloth or a soft
paper towel, and then reinsert.
If the problem recurs, the card
cannot be used.
You attempted to access the
card while the card
compartment cover was open.
Close the cover.
No film pack loaded in the
camera.
Film pack is inserted incorrectly.
Load a film pack.
Remove and reinsert the film
pack.
NO CARD
CARD FULL
WRITE-PROTECT
CARD ERROR
CARD-COVER OPEN
NO FILM PACK
The camera is unable to play or
print the recorded image.
Transfer the image to your
computer and try viewing it
using CAMEDIA Master or
other software. If you cannot
open the image at your
computer, the image file is
probably corrupted.
PICTURE ERROR
The card does not have enough
room to store print-related
settings.
Use a different card, or erase
unneeded images.
CARD FULL
The card does not have any
images stored on it, so there is
nothing to display or to print.
Take some pictures, or insert a
card that you have already
recorded images onto.
NO PICTURES