Filter
Top Products
E-4
4 Attaching the Zoom Gear on the Lens
ቢ
Turn the lens’ zoom ring so that the index points to “25 mm.”
ባ
Check the position of the lock dial’s hinge on the zoom gear,
then turn the lock dial counterclockwise to release the lock
and open the gear.
Hinge
Open
Lock dial
ቤ
Open the zoom gear wide and align its hinge with the zoom
index on the lens. Place the zoom gear on the lens and
adjust the rotation direction of the zoom gear. At this time,
bring the gear section of the zoom gear to the left of the
hinge as shown in the illustration.
Align the hinge
with the index.
Gear
ብ
Set the front-rear orientation of the zoom gear by aligning
the edge of the hinge with the end of the rubber section on
the lens’s zoom ring.
ቦ
After positioning the zoom gear, place it against the lens’s
zoom ring (taking care not to displace the zoom gear), and
turn the zoom gear’s lock dial all the way clockwise to lock it.
Push the gear with a finger
to place the gear against
the lens.
Tu rn the lock dial
to lock the zoom
gear.
To control zooming of the camera lens, the provided zoom gear must be attached to the zoom ring of the lens.
CAUTION: