Filter
Top Products
30 En
En
4
Take the picture.
• When using the remote control device, point it at the remote control
receiver on the camera and then press the shutter button on the
device.
Self-timer : The self-timer/remote control lamp lights for about
10 seconds, then starts blinking. After blinking for
about 2 seconds, the picture is taken.
Remote control : The self-timer/remote control lamp blinks for about 2
seconds before taking the picture.
J MACRO MODE SHOOTING
The macro mode allows you to shoot at a distance of 20 cm to 50 cm (0.7 ft.
to 1.6 ft.) from your subject.
Regular photographs can be taken, but the camera may take time to focus on
distant subjects.
1
Open the lens barrier fully.
• The lens extends and the monitor turns on.
2
Press ( ) to set macro mode.
• The setting changes between ON and OFF each time is pressed.
When the macro mode is selected, is displayed on the monitor.
3
Take the picture.
• If you are close to a subject, the picture in the viewfinder is different
from the area that the camera actually records. For macro mode
shooting, we recommend using the monitor.
Note
basic_e_opx_6.fm Page 30 Thursday, December 12, 2002 10:44 AM