Filter
Top Products
EN 45
Menu operations
• When [X] has not been set, [ALARM CLOCK] is not available.
• When [DUALTIME] is set to [ON], the alarm sounds according to the dual time date and time
setting.
Setting an alarm
Operating, shutting off and checking the alarm
• Operating the alarm:
Turn off the camera. The alarm only operates when the camera is off.
• Shutting off the alarm:
While the alarm is sounding, press any button to shut off the alarm and turn off the camera. Note
that pressing o will turn the camera on.
After 1 minute of no operation, the alarm stops automatically and the camera turns off when
[SNOOZE] is set to [OFF].
• Checking the alarm settings:
While the camera is off, press DISP./E to display the set alarm time and the current time for 3
seconds.
ALARM CLOCK .....................................................................................
Setting alarms
OFF No alarm is set or alarm is canceled.
ONE TIME Alarm is activated once. After the alarm goes off, the setting is
canceled.
DAILY Alarm is activated daily at the set time.
• Select [ONE TIME] or [DAILY], and set the alarm time.
• You can set snooze or alarm sounds and volume.
TIME Sets the alarm time.
SNOOZE OFF No snooze is set.
ON Alarm is activated every 5 minutes,
up to 7 times.
ALARM SOUND 1 LOW/MID/HIGH
2 LOW/MID/HIGH
3 LOW/MID/HIGH
MOVE
ALARM CLOCK
TIME
ALARM SOUND
SNOOZE
09:00
09:00
OK
SET
d4355_e_unified_forU-Print_00_bookfile.book Page 45 Thursday, July 12, 2007 11:01 AM