Olympus V204033WU000 Camcorder User Manual


 
60
EN
Flash shooting
3
Adjusting ash output (Flash intensity control)
Flash output can be adjusted if you nd that your subject to appears overexposed, or is
underexposed even though the exposure in the rest of the frame is just right.
1
Display the live control (P. 20) and select the
Flash intensity control item using FG.
2
Choose the compensation value with HI and
press Q.
ISO
AUTO
ISOISOISO
AUTOAUTOAUTO
P
RR
S-AFS-AF
00
OFFOFF
0.0
% Tips
For information on ash bracketing: g “FL BKT (FL bracketing)” (P. 58)
# Cautions
This does not work when the ash control mode on the electronic ash is set to MANUAL.
If ash intensity is adjusted on the electronic ash, it will be combined with the camera’s
ash intensity setting.
When [w+F] is set to [On], the ash intensity value will be added to the exposure
compensation value. g “Customizing camera settings” (P. 81)
Using external ash units designated for use with this
camera
Optional external ash units designated for use with this camera support a wide variety
of options for ash photography, including automatic ash control, super FP, and
wireless ash control (P. 93).
Other external ash units
Observe the following precautions when mounting an external ash unit not designated
for use with this camera on the camera hot shoe:
Using obsolete ash units that apply currents of more than about 24 V to the camera hot
shoe X-contact will damage the camera.
Connecting ash units with signal contacts that do not conform to Olympus speci cations
may damage the camera.
Use only with the camera in shooting mode M at shutter speeds slower than 1/180 s and
at ISO settings other than [AUTO].
Flash control can only be performed by manually setting the ash to the ISO sensitivity
and aperture values selected with the camera. Flash brightness can be adjusted by
adjusting either ISO sensitivity or aperture.
Use a ash with an angle of illumination suited to the lens. Angle of illumination is usually
expressed using 35-mm format equivalent focal lengths.