Filter
Top Products
78
Setup menu list
CAMERA SETUP screen
Item
Display
mode
Description of settings
SYNCRO
SCAN
(Camera) Adjusts the synchro scan shutter speed used for shooting images on a TV
screen, etc.
Holding the Operation lever toward the or direction will cause the values
to change at a faster rate.
Available shutter speeds with SYSTEM
FREQ 59.9 Hz
60P/60i:
1/60.0…1/250.0
30P:
1/30.0…1/48.0…1/250.0
24P:
1/24.0…1/48.0…1/250.0
•
•
•
Available shutter speeds with
SYSTEM FREQ 50 Hz
50P/50i:
1/50.0 … 1/250.0
25P:
1/25.0 … 1/48.0 … 1/250.0
•
•
DETAIL LEVEL (Camera) Adjusts the level of the image outline correction (in the horizontal and vertical
directions).
- 7…0…+ 7
V DETAIL
LEVEL
(Camera) Adjusts the level of outline correction in the vertical direction.
- 7…0…+ 7
DETAIL
CORING
(Camera) Adjusts the level of noise reduction of the detail signal.
- 7…0…+ 7
Set to – for a clearer image. Noise increases slightly.
Set to + to reduce noise.
CHROMA
LEVEL
(Camera) Adjusts the chroma level.
- 7…0…+ 7
CHROMA
PHASE
(Camera) Makes fine adjustments to the chroma phase.
- 7…0…+ 7
COLOR TEMP
Ach
(Camera) Makes fine adjustments to the color temperature (after white balance Ach
adjustment).
- 7…0…+ 7
COLOR TEMP
Bch
(Camera) Makes fine adjustments to the color temperature (after white balance Bch
adjustment).
- 7…0…+ 7
MASTER PED (Camera) Adjusts the master pedestal (black level of the image) as the basis for
images.
- 15…0…+ 15
GAMMA (Camera) Selects the gamma curves.
HD NORM: This gamma setting is suitable for HD shooting.
LOW: Makes a mellow image using the gamma curve which has a
gentle incline in low-brightness curve. The contrast sharpens.
HIGH:
Expands the tone of dark parts and makes a brighter image using
the gamma curve which has a sharp incline in low-brightness
curve. The contrast softens.
B.PRESS: Makes the contrast shaper than LOW.
CINE-LIKE D:
Uses a gamma designed to create cinema-like images.
CINE-LIKE V:
Uses a gamma designed to create cinema-like images with
emphasized contrast.
When you select CINE-LIKE gamma, we recommend setting the lens
aperture lower than normal image level (approximately 1/2) for optimal
results.
•
indicates the factory setting.