Filter
Top Products
23
PREPARATION
Battery
Before using the battery, fully charge it in the
AC adapter.
We recommend that you keep a spare battery
with you whenever you use the battery to run
the camera-recorder.
Charging time Continuous recording time
1
Align the battery with the “” marking on
the AC adapter, place it flat, and slide it in
the direction shown below.
O Before doing this, disconnect the DC cord
from the AC adapter as the battery cannot
be charged if it is connected.
2
Connect the AC cord to the power outlet.
O The POWER lamp and CHARGE lamp on
the AC adapter light, and charging begins.
O If the CHARGE lamp does not light when
the battery is placed in the AC adapter,
remove the battery and place it in the
adapter once again.
3
When the battery has been charged, the
CHARGE lamp on the AC adapter goes off.
4
Slide the battery, and remove it.