Panasonic AG-AC130P Camcorder User Manual


 
58
2) Select [YES] on the confirmation screen
to attach an index.
The point in the clip at which the index
will actually be attached will be accurate
to within an error of 0.5 seconds.
To delete the index, select
[INDEX]
[YES] in step
3
before
performing the following.
1) Select the clip to play, tilt the
OPERATION lever in the <
>
direction, and pause the clip.
2) Since tilting the OPERATION lever
in the <
>< > directions moves the
pointer between the points where
indexes are attached, move the
pointer to the index to be deleted, and
push the OPERATION lever.
3) Select [YES] on the confirmation
screen.
[NO]:
Returns to the previous screen.
• It is not possible to add indexes to clips shot
using a consumer camcorder model.
• It is not possible to adjust the volume during
index playback.
[CLIP PROTECT] (only in AVCHD mode):
[YES]:
Protects selected clips. ([
] mark will be
displayed.)
Cancels protection when the protected
clip is selected. ([
] mark will
disappear.)
Formatting the memory card will delete all
clips even if they are protected.
[NO]:
Returns to the previous screen.
4
Press the <MENU> button to return to the
thumbnail screen.
Repairing clips (only in DV mode)
Repair clips on which the defective clip indicator
[
X
] (Yellow) is displayed on the thumbnail screen.
Clips with the defective clip indicator [
X
] (Red)
cannot be repaired.
1
Press the <MENU> button on the thumbnail
screen.
The thumbnail menu will be displayed.
2
Select [REPAIR] in the [OPERATION] item on
the thumbnail menu and press [YES].
3
Select a clip to repair using the OPERATION
lever.
4
Press the <EXEC> button.
5
Select [YES] on the confirmation screen,
and push the OPERATION lever.
Clip repair will be performed.
When shot mark has been set on the clip, the
setting is canceled.
• Repair defective clips with this camera before
moving them to a computer. Defective clips
cannot be repaired once they are moved to
a computer and written back on the memory
card.