Filter
Top Products
36
Basic shooting operations (continued)
SD Memory Card access lamp
CAM mode/PB mode
Illuminated orange: Reading/writing possible
Flashing orange (fast): Verifying card/inspecting
card for possible defects
Flashing orange (slow): Accessing card
Flashing green (slow): Card write-protected/
no space left on card
Illuminated green: Card not selected for
recording
Off: No card inserted/unformatted or incompatible
card inserted
When the USB is connected
Flashing orange: Accessing card
Off: A status other than access underway.
SD Memory Card access lamp
Selecting a slot
Of the two SD memory card slots, the slot to be
used for recording can be switched.
1
Press the SLOT SELECT button while
recording is paused.
The access lamp of the slot for recording lights
up orange.
This function works when a recordable SD •
card is inserted in both slots.
The slot cannot be switched during recording.•
Formatting SD Memory Cards
1
Set the camera’s power switch to ON.
(Page 27)
2
Press the MENU button.
3
SelectCARDFUNCTIONS→CARD
FORMAT from the menu, and then push the
OPERATION lever to confirm.
Select the slot number of the card to format •
when the following screen is displayed.
Select NO if you do not wish to format the
card.
Press the MENU button to close the menu display.•
4
Select YES on the conformation screen.
The SD Memory Card will be formatted.•
5
Press the MENU button to finish.
When an SD Memory Card is formatted, all •
data including video data and still images
recorded on the card will be erased and will
not be restorable.
Save all important data to your computer.