Filter
Top Products
12
Parts and their functions
CAWB button
When this button is pressed while the WHITE
BAL switch B is set to the A or B position,
the white balance is automatically adjusted,
and the white balance value is stored in the
memory.
If this button is then held down, the black
balance is adjusted.
In the progressive mode, the black balance is
adjusted following the automatic adjustment
of the white balance simply by pressing this
button.
When this button is pressed while the WHITE
BAL switch B is set to the PRST position, the
current white balance value is displayed.
When the AWB button is pressed again, the
3200K and 5600K white balance values are
selected alternately.
OWhile recording is in progress, the black
balance cannot be adjusted.
DIRIS button
Each time this button is pressed, the method
of adjusting the lens iris is switched between
the auto mode and manual mode.
EIRIS dial
This is used to adjust the lens iris.
When the IRIS button D is set to the manual
mode, this dial is used to adjust the lens iris.
Even in the auto mode, the lens iris can be
adjusted using this dial.
OThe direction in which the IRIS dial is
turned and iris control can be set using the
IRIS DIAL item on the setting menu SW
MODE screen. (See page 40)
FFOCUS switch
This is used to select the method of
controlling the focus.
A (AUTO):
Auto focus mode
M (MANUAL):
Manual focus mode
The focus ring H is controlled manually to
adjust the focus.
∞
:
After the focal length has been set to
infinity, the manual focus mode is
established. Even if the FOCUS switch is
set to the
∞
position, it will return to the M
(MANUAL) position.
OEven when the manual focus mode is
established, the AUTO button K setting
takes priority if it is pressed.
OIf flicker occurs, the auto focus control may
not be exercised properly, so select a
shutter speed suited to the lighting. (See
page 29)
OIn the progressive mode, the manual focus
mode is established.
GPUSH AUTO button
While this button is pressed with the FOCUS
switch set to the M (MANUAL) position, the
auto focus mode is established, and the focus
is adjusted.
HFocus ring
IZoom ring
If the zoom ring pin is not required, fit it into
the threaded hole under the handle so that it
will not be lost.
F
I
H
G
D
E
C
Zoom ring pin