Filter
Top Products
57
Shooting
With this unit, the time code value is adjusted in
accordance with the format and frame rate. For
this reason, bear in mind that making a change in
the format or frame rate may result in discontinuity
from the last time code value of the previous
recording.
Recording format
Time code
adjustment
1080/24P
720/24P
Adjustable in
4-frame increments
4
When the screen below appears, set the
time code value.
Tilt the Operation lever in the
directions
and select time code value.
Tilt in the direction to move to the next digit,
and tilt in the
directions again to select
value.
You can reset the time code to zero by pressing
RESET/TC SET button.
BARS
LCD
ZEBRA OIS
EVF DTL WFM
CH1 SELECT CH2 SELECT
INPUT 1 INPUT 2
SHUTTER
COUNTER
RESET/TC SET
AUDIO
SPEED SELECT
INT(L)
INPUT1
INPUT2
INT(R)
INPUT2
ON
MIC POWER +48V
OFF
ON
OFF
Camera
5
Push the Operation lever when you have
finished setting the time code.
6
Tilt the Operation lever in the direction to
move to YES, and push the Operation lever.