Filter
Top Products
- 14 -
How to set up the system
Configuration example 1: Connection of camera controller
Use multi cable supplied with AK-HRP150G for the connection of camera controller
AK-HRP150G and this unit.
Multi cable
(POWER + CONTROL)
Lens
Camera controller
AK-HRP150G
AC adapter
AW-PS510AN
Monitor
HD SDI OUT
IRIS
AK-HC1800N
Select “1” as the PROTOCOL
setting.
Before connecting the cables, be sure to set the power switch of AC adapter to OFF.
Connect the multi cable to the interface connector of the camera, and the opposite
side to camera controller.
Set the AC adapter power switch to ON, then the camera can be controlled.
After shooting, set the AC adapter power switch to OFF.