Filter
Top Products
5
• Do not attempt to disassemble the
camera or other units. In order to prevent
electric shock, do not remove screws or
covers. There are no user-serviceable
parts inside.
• Do not abuse the camera. Avoid striking,
shaking, etc. The camera contains
sensitive components which could be
damaged by improper handling or
storage.
• Do not let the lens remain uncapped
when the camera is not use. If the lens is
not installed, do not leave the lens mount
hole uncovered.
• Do not touch the surface of the lens or
prism.
• Do not use strong of abrasive detergents
when cleaning the camera body.
• Do not aim the camera toward the sun,
no matter whether it is turned on or not.
• Do not expose the camera to rain or
moisture, and do not try to operate the
equipment in wet conditions. Do not
operate the camera if it becomes wet.
• Do not operate the camera outdoors
during a lightning storm.
• Do not use the camera in an extreme
environment where high temperatures or
high humidity exist.
• Do not leave the camera turned on when
not in use. Do not unnecessarily turn the
camera power on and off repeatedly. Do
not block the ventilation slots.
•Do not cover the port otherwise block
ventilation during operation. Internal heat
buildup can cause a fire.
• Refer any servicing to qualified service
personnel.
• Handle the camera with care.
• Protect the precision made lens by
placing the lens cap over when the
camera is not in use. If the lens is not
installed, protect the surface of the prism
by placing the body cap into the lens
mount hole.
• Use a mild blower or lens cleaning tissue
designed for coated lenses, to clean the
surface of the lens or prism in the event
that it should become dirty.
• Use a dry cloth to clean the camera if it is
dirty. In case the dirt is hard to remove,
use mild detergent and wipe gently.
• Use caution when operating the camera
in the vicinity of spot lights or bright
lights, as well as light reflecting objects
and surfaces.
• Take immediate action if ever the camera
should become wet. Turn the power off
and have the unit checked by an
authorized service facility.
• Follow normal safety precaution to avoid
personal injury.
• Use the camera in an environment where
the temperature is within 32°F to +104°F
(0°C to +40°C), and the relative humidity
is within 30% to 90% (no condensation).
• Always turn the power off when the
camera is not going to be used. Operate
the camera only when there is adequate
ventilation.
• Cooling fan
There is internally provided a cooling fan.
Since the cooling fan is a consumable
part, replace it after about 50,000 hours
of operation.
(Be sure to ask the dealer for the
replacement.)
DON’TS DO’S
Precautions