Panasonic BL-MS102 Digital Camera User Manual


 
Other features
http://panasonic.co.jp/pcc/products/en/netwkcam/
You can monitor over the Internet
or an intranet. An Internet
connection also lets you monitor
right from your cell phone*.
When the sensor detects
something, it sends the image to
you attached to an e-mail message.
Remote Control
& Multi-Camera Capacity
Panasonic Improves Safety and Efficiency
Pan (display range: 143˚max)
Tilt (display range: 82˚max)
BL-C10/C30
BL-C10/C30
BL-C10/C30
*Set the switch on the back of the BL-WV10 to Sequential Display
mode to use.
*Recording onto an SD Memory Card is not possible in Sequential
Display mode.
*Internet-compatible models only. Images are JPEG only.
*1 Applicable models:BL-C10/C30
*2 Applicable models:BB-HCM311/HCM331/HCM371/HCM381/HCE481,
BL-C1/C20/C30
*3 Applicable models: BB-HCM311/HCM331/HCM371/HCM381/HCE481
SD memory card recording Capacity
Movie Recording Time
Timer/Sensor
Recording
Standard
Recording
No. of
Pictures
LONG*
C Series
LOW
HIGH
8MB 16MB 32MB 64MB
128MB 256MB 512MB
1GB
SD Capacity
Picture Storage
8MB 16MB 32MB 64MB
128MB 256MB 512MB
1GB
SD Capacity
1hr.
26sec.
270
160
2hr.
30min.
58sec.
450
300
5hr.
10min.
2min.
940
630
10hr.
40min.
4min.
1930
1290
21hr.
40min.
8min.
3900
2600
43hr.
20min.
16min.
7780
5190
87hr.
10min.
33min.
15680
10460
167hr.
50min.
65min.
30170
20120
2GB
2GB
341hr.
20min.
2hr.
16min.
61340
40920
Stores
Check large areas
in fine detail.
Factories
Extended-time
recording even at night.
Warehouses
Check visitors
with ease.
Monitor things
periodically.
Entrances
Remote Pan/Tilt and Zoom Control on TV
You can record moving or still images onto an
SD Memory Card even at night when nobody is
operating the system. You can also combine
this function with the Automatic Alert Setting,
to record only when there is movement. If you
need a longer recording capability, just connect
the system to a DVD or video tape recorder.
Automatic Alert Settings
SD Memory Card Recording*
Network Connection
and Cell Phone Monitoring
Sequential Display* with Time Stamp
When multiple cameras are used, this function
automatically switches from one to another. In
addition to providing thorough monitoring, it
also lets you display the time. To record, simply
connect the system to a DVD or video tape
recorder.
Use the remote control to change the
camera's direction, vertically or horizontally,
while watching the image on TV. For a
detailed check, you can enlarge the view
with the 16x zoom. With the BB-HCM381 or
BB-HCE481, you can use the camera's 21x
optical zoom for an even closer look.
Human Detection
Sensor
Motion Detection Function/
Setting Browser
Monitoring Image
You're alerted immediately when someone
passes through the entranceway. Even if the TV
is turned off, a buzzer on the adaptor ensures
that no visitors go unchecked.
• Three detection methods available: human
detection sensor
*1
(detects heat), motion
detection function
*2
(detects light), and
external sensor
*3
.
Make all major settings for recording, multi-
camera viewing,
and more easily
with the remote
control.
0M0106SP-MS102WV10-LT.CE.B
All pictures simulated.
Design and specifications are subject to
change without notice.
Specifications
Image data
compression system
Video resolution
Image quality
Frame rate*
1
Security
Buffered images*
2
Viewing angle
Revolving speed
Number of pixels
Lens focal point
Lens brightness
Required light intensity
Network interface
BL-C30
BL-WV10
Wireless type
Network camera Wireless camera
monitoring system
JPEG
(Motion JPEG for moving image display)
640 x 480, 320 x 240, 160 x 120
3 modes (favor clarity, standard, favor motion)
Max. 7.5 frames/sec. (640 x 480)
Max. 15 frames/sec. (320 x 240)
Max. 15 frames/sec. (160 x 120)
User ID/Password
Approx. 250 images: (320 x 240),
standard image quality
43˚ horizontal (total 143˚)
32˚ vertical (total 82˚)
Pan: Max. 50˚/sec Tilt: Max. 50˚/sec
Approx. 320,000 pixels
Fixed (focal range: 0.5m to
m)
F2.8
1 to 10,000 lux
Ethernet (10 Base-T/100 Base-TX)
802.11 b/g
Diversity
11 ch.
up to 54 Mbps.
WEP 64/128/152 bit
41˚F to 104˚F (+5˚C to +40˚C)
20 % to 80 % (No condensation)
98 x 74 x 73 mm (Only the unit)
200 g (Only the unit)
AC adaptor:
Input 120 V AC, Output 12 V DC
6.4 W
Server
Standards
Antenna
Number of channel
Transmission speed
Security
Operating temperature
Operating humidity
Dimensions (H x W x D)
Weight
Power supply
Consumption
General Wireless
Network camera
• LAN side: Ethernet
(10 Base-T/100 Base-TX) x 4 ports
• Video output terminal (composite NTSC) x 1
• SD Memory Card slot x 1
• IPv4: TCP, UDP, HTTP, FTP, DHCP
• 640 x 480, 320 x 240
• 3 modes (Favor clarity, standard, favor motion)
• JPEG (Motion JPEG for moving image display)
• Max. 30 frames/sec (320 x 240)
• User ID/password
• 42 x 220 x 171 mm
(excluding antenna and protrusions)
• 500 g
• AC adaptor: Input 110 V AC, Output 12 V DC
• 7.5 W
Interface
Supported protocols
Video resolution
Image quality
Image data
compression system
Frame rate
Security
Dimensions
(H x W x D)
Weight (Main unit only)
Power supply
Consumption
*1 This varies depending on the subject, image quality, network environment,
PC performance, etc.
*2 The number of images that can be stored varies depending on the subject.
BL-WV10
BL-C30
Part Names [Rear View]
*Resolution : 320 x 240, Image quality : favor motion,
Image refresh interval : 5 sec.
LAN jack section
Video out terminal
Factory default reset button
AntennaDC IN jack
1x
16x
Lens
ON/OFF
switch
Tripod
mount
Lens
Human detection
sensor
Ethernet
(LAN) port
DC IN jack