Panasonic BLVT164P Security Camera User Manual


 
Note
VP101
VP101
:
“Mask area” can be set only when “4:3” is selected for “Aspect ratio”. If the “Aspect ratio” is changed
to “16:9” after setting the mask area, the setting of the mask area is maintained.
3. Click the divided areas to be masked.
The clicked areas will be masked and will become white. To cancel masking, click the area again.
4. Click the [End] button after completing masking areas.
VT164W
VT164W
VT164
VT164
: The borders on the image displayed on the [Image/Position] tab will disappear.
VP104W
VP104W
VP104
VP104
VP101
VP101
: The borders on the image displayed on the [Image/Privacy] tab will
disappear.
IMPORTANT
VT164W
VT164W
VT164
VT164
VP104W
VP104W
VP104
VP104
:
When “4:3” is selected for the aspect ratio of JPEG/H.264, the image will be displayed clipped from
the image of “16:9”. Therefore even when “4:3” is set, the brightness of the masked area will affect the
image. It is recommended that the aspect ratio should be once set to “16:9” before masking.
64 Operating Instructions
9 Configure the settings relating to images and audio [Image/Audio] (BL-VT164W/BL-VT164)/ Configure the settings
relating to images [Image] (BL-VP104W/BL-VP104/BL-VP101)