Filter
Top Products
Note
VP101
VP101
:
• “Mask area” can be set only when “4:3” is selected for “Aspect ratio”. If the “Aspect ratio” is changed
to “16:9” after setting the mask area, the setting of the mask area is maintained.
3. Click the divided areas to be masked.
→ The clicked areas will be masked and will become white. To cancel masking, click the area again.
4. Click the [End] button after completing masking areas.
→
VT164W
VT164W
VT164
VT164
: The borders on the image displayed on the [Image/Position] tab will disappear.
→
VP104W
VP104W
VP104
VP104
VP101
VP101
: The borders on the image displayed on the [Image/Privacy] tab will
disappear.
IMPORTANT
VT164W
VT164W
VT164
VT164
VP104W
VP104W
VP104
VP104
:
• When “4:3” is selected for the aspect ratio of JPEG/H.264, the image will be displayed clipped from
the image of “16:9”. Therefore even when “4:3” is set, the brightness of the masked area will affect the
image. It is recommended that the aspect ratio should be once set to “16:9” before masking.
64 Operating Instructions
9 Configure the settings relating to images and audio [Image/Audio] (BL-VT164W/BL-VT164)/ Configure the settings
relating to images [Image] (BL-VP104W/BL-VP104/BL-VP101)