Filter
Top Products
40
Before Requesting Service
If you have a problem with your Digital Camera, it may be something you can correct
yourself.
Check the list below for symptoms and corrections.
Symptom Correction
Cannot charge the Battery Pack. • Make sure the rechargeable Ni-Cd
Battery Pack is inserted. (p. 8)
• Make sure all necessary connections
are correct and tight. (p. 9)
No power. • Battery Pack is worn out. (p. 8)
• Make sure polarities are aligned
properly. (p. 8)
• Make sure the rechargeable Ni-Cd
Battery Pack is fully charged. (p. 9)
Power shuts off automatically. • Auto shut off feature is on.
Press SHTR (SHUTTER), or set the
POWER switch to OFF and then set to
REC. (p. 20)
Cannot capture the image. • CompactFlash Card is not inserted.
(p. 17)
• Make sure the POWER switch is set to
REC. (p. 19)
• No memory. Delete some images before
capturing images. (pp. 27, 28)
LCD Viewfinder image is too bright or dark. • Make sure the LCD Viewfinder
brightness setting is adjusted. (p. 14)
Indication or image on the LCD Viewfinder • Make sure the NORMAL/MACRO1/
is not focused. MACRO2 switch is properly set. (p. 21)
Cannot playback. • CompactFlash Card is not inserted.
(p. 17)
• There are no images in the memory.
(p. 22)
• Make sure the POWER switch is set to
PLAY. (p. 22)
Auto Playback feature can not be • There is only one image in the memory.
performed.
No picture on the TV (if connected). • Make sure all necessary connections
are correct and tight. (p. 29)
• Make sure the TV is set to video input
mode. (p. 29)