Filter
Top Products
Advanced-Shooting
- 57 -
a
[BABY1] /
s
[BABY2]
This takes pictures of a baby with a healthy complexion. When you use the ash, the light from it is weaker than usual.
It is possible to set different birthdays and names for [BABY1] and [BABY2]. You can select to
have these appear at the time of playback, or have them stamped on the recorded image using
[TEXT STAMP] (P87).
Birthday ([AGE])/Name setting
1 Press
e
/
r
to select [AGE] or [NAME] and then press
q
.
2 Press
e
/
r
to select [SET] and then press [MENU/SET].
3 Enter the birthday or name.
Birthday:
w
/
q
: Select the items (year/month/day).
e
/
r
: Setting.
[MENU/SET]: Exit.
Name: For details on how to enter characters, read the [TITLE EDIT] section on P85.
• When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON].
• If [ON] is selected when the birthday or name has not been registered, the setting
screen appears automatically.
4 Press [MENU/SET] to nish.
To cancel [AGE] and [NAME]
Select the [OFF] setting in step
2
of the “Birthday ([AGE])/Name setting” procedure.
Note
• The age and name can be printed out using the “PHOTOfunSTUDIO” bundled software on the
CD-ROM (supplied).
•
If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or
name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].
•
The focus range is 5 cm (0.17 feet) (Wide)/50 cm (1.64 feet) (Tele) to
7
.
•
[i.AUTO] is activated.
• If you turn on the camera in [BABY1]/[BABY2], the age and name will be displayed
at the
lower left of the screen for about 5 seconds, along with the current date and time.
• If the age is not properly displayed, check the clock and birthday settings.
• The birthday setting can be reset with [RESET].
• The initial setting for [AF MODE] is [
3
].