Filter
Top Products
Preparation
- 26 -
•Press the shutter button halfway or turn the camera off and on to cancel [POWER SAVE].
•[POWER SAVE] is set to [5MIN.] in the Intelligent Auto mode.
•[POWER SAVE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].
•The keypad light blinks while the LCD monitor is turned off. Press any button to turn on the LCD
monitor again.
•[AUTO LCD OFF] does not work while operating menu or Playback Zoom.
•[POWER SAVE] does not work in the following cases.
–When using the AC adaptor
–When connecting to a PC or a printer
–When recording or playing back motion pictures
–During a slide show
–[AUTO DEMO]
•[AUTO LCD OFF] does not work in the following cases.
–When using the AC adaptor
–When connecting to a PC or a printer
–While the self-timer is set
–When recording or playing back motion pictures
–During a slide show
–While the menu screen is displayed
–[AUTO DEMO]
[HISTOGRAM]
This allows you to set either to display or not display the
histogram. (P48)
[OFF]/[ON]
q [ECONOMY]
You can conserve the battery life by setting these menus.
Also, it will turn off the LCD monitor automatically when not in use
to prevent discharge of the battery.
p [POWER SAVE]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[OFF]/[2MIN.]/[5MIN.]/[10MIN.]
[AUTO LCD OFF]:
The LCD monitor is automatically turned off if the camera has not
been used for the time selected on the setting.
[OFF]/[15SEC.]/[30SEC.]