Filter
Top Products
Recording pictures (advanced)
67
Setting the White Balance manually (White set)
Preparation
• Set the mode dial except for [ ]/[ ]. (P28)
1 Select [W.BALANCE] and set to
[].
2 (Only when setting the white
balance again) Press 1.
3 Aim the camera at a sheet of white
paper 1 or similar object so that it
completely fills the frame to white
on the screen and press the
shutter button fully.
• Close the menu by pressing the
[MENU] button after finishing the
setting.
¬
Suggestions/Tips
¬
• When setting the white balance to the
mode except for [AUTO], you can
finely adjust the white balance. (P68)
• The setting of the white balance is
applied to the other recording modes.
• In Motion image mode [ ], the white
balance is fixed to [AUTO].
• When taking a picture with the flash,
the white balance will be automatically
adjusted [except for [ ] (Daylight)
and [ ] (Flash)], but the white
balance may not be properly adjusted
when the photo flash is insufficient.
MENU
SET
WB
R
E
V
I
E
W
SET
WB
R
E
V
I
E
W
REC
1
/
4
SETUP
PICT.SIZE
QUALITY
SPOT MODE
2304
OFF
W.BALANCE
EXITSETSELECT
MENU
WB
WB
FZ10-GN.book 67 ページ ２００３年１２月２４日 水曜日 午前１０時３９分