Filter
Top Products
Recording pictures (advanced)
52
Taking Pictures with Aperture-priority AE
When you want the background to be in sharp focus, set the aperture value to a
higher number. The higher the aperture value, the smaller the aperture opening will
be. For a soft focus background, set the aperture number to a lower number which
corresponds to a larger aperture opening.
Preparation
• Set the mode dial to [ ]. (P30)
1 Select [AE MODE] and set it to [A].
• Close the menu by pressing the
[MENU] button after finishing the
setting.
2 Set the aperture value and take
the picture.
¬
Suggestions/Tips
¬
• Refer to P56 for the available range of
the aperture value and the shutter
speed.
• The focus range is 0.16 feet (5 cm)– ¶
(Wide) and 6.56 feet (2 m)–¶ (Tele).
• If the subject is too bright, set to larger
aperture value, if too dim, set to
smaller aperture value.
• The brightness of the screen may
differ from that of the actual pictures.
Check it using review function or
setting to the playback mode.
• The ISO sensitivity cannot be set to
[AUTO].
• When the exposure is not adequate, of
the aperture and the shutter speed
values on the screen turn red.
MENU
SET
WB
R
E
V
I
E
W
SET
WB
R
E
V
I
E
W
PICT.SIZE
QUALITY
2304
REC
1
/
4
SETUP
A M
AE MODE
W.BALANCE
AUTO
S
AE
EXIT
SETSELECT
MENU
2304
19
1
A
ISO100
SET
WB
R
E
V
I
E
W
EXPOSURE
F2.8
FZ10-PP.book 52 ページ ２００３年１１月１８日 火曜日 午後１時７分