Filter
Top Products
Preparation
20
Attaching the Lens Hood
In bright sunlight or backlight, the lens hood
will minimize lens flare and ghosting. The
lens hood cuts off excess lighting and
improves the picture quality.
• Check that the camera is turned off and
that the lens is retracted.
• Close the flash.
1 1 Detach the lens ring.
2 Attach the lens hood adaptor.
2 Attach the lens hood.
1 Place the camera upside down.
2 Catch the hook on the lens
hood adaptor.
3 Push the lens hood.
4 Align the marks as illustrated.
5 Tighten the screw.
• Check if the screw is loose and then
attach the lens hood.
• Do not tighten the screw too much.
4
1
3
2
5
FZ15-PP.book 20 ページ ２００４年７月２０日 火曜日 午後９時２７分