121
VQT1U50
Connecting to other equipment
Press 3/4 to select [PictBridge(PTP)], and then
press [MENU/SET].
Note
•
Do not use any other USB connection cables except the supplied one. Use of cables other than
the supplied USB connection cable may cause malfunction.
• Turn the camera off before connecting or disconnecting the AC adaptor (P132).
• Before inserting or removing a card, turn the camera off, and disconnect the USB connection
cable.
• HDMI connection is disabled and connection with the USB connection cable will take priority
when you connect the USB connection cable while the HDMI mini cable is connected (P125).
Select and set the items both on the screen in step 3 of the
“Single picture” procedures.
•
When you want to print pictures in a paper size or a layout which is not
supported by the camera, set [PAPER SIZE] or [PAGE LAYOUT] to
[{] and then set the paper size or the layout on the printer. (For
details, refer to the operating instructions of the printer.)
Single picture
Press 3 to select [SINGLE PICTURE] and then
press [MENU/SET].
Press 2/1 to select the picture and then press 4.
• The message disappears in about 2 seconds.
Press 3/4 to select [PRINT START] and then
press [MENU/SET].
• Press [MENU/SET] to cancel printing halfway.
• Disconnect the USB connection cable after printing.
Print Settings
USB MODE
SELECT
SET
PLEASE SELECT
THE USB MODE
PictBridge(PTP)
PC
MENU
PictBridge
SELECT
SET
SINGLE PICTURE
DPOF PICTURE
MENU
PictBridge
MENU
PRINT
100
_
0001100
100
_
0001
0001
100
_
0001
PLEASE SELECT
THE PICTURE TO PRINT
SELECT
EXIT
OFF
1
CANCEL
SELECT
SET
PRINT START
PRINT WITH DATE
NUM. OF PRINTS
PAPER SIZE
PAGE LAYOUT
SINGLE PICTURE
MENU
OFF
1
CANCEL
SELECT
EXIT
PRINT START
PRINT WITH DATE
NUM. OF PRINTS
PAPER SIZE
PAGE LAYOUT
SINGLE PICTURE
MENU