Filter
Top Products
57
VQT1U50
Advanced (Recording pictures)
∫ Set the position of the histogram
•
Set the [HISTOGRAM] in the [CUSTOM MENU] menu to [ON]. (P105)
1 Press [Q.MENU] to display the quick menu. (P29)
2 Press 2/1 to select histogram, and then press [MENU/
SET].
•
You can also use the front dial to set.
• Selected item will be displayed in orange in the quick menu
screen, and the histogram itself will be displayed in orange when
the histogram is selected.
3 Press 3/4/2/1 to set the position.
4 Press [MENU/SET] to finish the setting.
5 Press [Q.MENU] to close the quick menu.
•
You can also press the shutter button halfway to close the quick
menu.
• Position of the histogram can be set from the [CUSTOM MENU]
menu too.
Note
•
When the recorded picture and the histogram do not match each other under the
following conditions, the histogram is displayed in orange.
– When the manual exposure assistance is other than [n0EV] during exposure compensation
or in the manual exposure mode
– When the flash is activated
– When the flash is closed
• When the brightness of the screen is not correctly displayed in dark places
• When the exposure is not adequately adjusted
• The histogram is an approximation in recording mode.
• The histogram displayed in this camera does not match histograms displayed by picture editing
software used in PCs etc.