Panasonic DMC-G3W Digital Camera User Manual


 
VQT3N40 (ENG)
22
About the Card
The following cards which conform to the SD video standard can be used with this unit.
(These cards are indicated as card in the text.)
¢ SD Speed Class is the speed standard regarding continuous writing. Check via the label on
the card, etc.
Access to the card
The access indication lights red when pictures are being recorded on
the card.
Do not turn this unit off, remove its battery or card, or disconnect the AC adaptor
(DMW-AC8PP; optional) when the access indication is lit (when pictures are being
written, read or deleted, or the card is being formatted). Furthermore, do not subject the
camera to vibration, impact or static electricity.
The card or the data on the card may be damaged, and this unit may no longer operate
normally.
If operation fails due to vibration, impact or static electricity, perform the operation
again.
Please confirm the latest information on the following website.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
Note
Keep the Memory Card out of reach of children to prevent swallowing.
About cards that can be used with this unit
Remarks
SD Memory Card
(8 MB to 2 GB)
Use a card with SD Speed Class
¢
with “Class 4” or
higher when recording motion pictures in [AVCHD].
Also, use a card with SD Speed Class with “Class 6” or
higher when recording motion pictures in [MOTION
JPEG].
SDHC Memory Card can be used with SDHC Memory Card
or SDXC Memory Card compatible equipment.
SDXC Memory Card can only be used with SDXC Memory
Card compatible equipment.
Check that the PC and other equipment are compatible when
using the SDXC Memory Cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
Only the cards with capacity listed left can be used.
SDHC Memory Card
(4 GB to 32 GB)
SDXC Memory Card
(48 GB, 64 GB)
e.g.:
DMC-G3K&G3W&G3PP-VQT3N40_eng.book 22 ページ 2011年4月29日 金曜日 午後12時13分