Filter
Top Products
37
Others
(ENG) VQT5D49
[Custom]
[Cust.Set Mem.] Registers the current camera settings as custom set.
[Silent Mode] Disables operational sounds and output of light at once.
[AF/AE Lock]
Sets the fixed content for focusing and exposure when the AF/AE lock is on.
[Half Press Release]
The shutter will immediately fire when the shutter button is pressed halfway.
[AFS/AFF] Assigns [AFS] or [AFF] to [AFS] of the focus mode lever.
[Quick AF]
Speeds up the focusing that takes place when you press the shutter button.
[Pinpoint AF Time]
Sets the time for which the screen is enlarged when the shutter button is
pressed halfway with Auto Focus Mode set to [ ].
[Pinpoint AF Display]
Sets whether to display the assist screen that appears when Auto Focus
Mode is set to [ ] in a window or full screen.
[AF Assist Lamp]
AF assist lamp will illuminate the subject when the shutter button is pressed half-way
making it easier for the camera to focus when recording in low light conditions.
[Focus/Release Priority] It will set so no picture can be taken when it is out of focus.
[AF+MF] You can set the focus manually after the automatic focus has finished.
[MF Assist] Sets the display method of MF Assist (enlarged screen).
[MF Assist Display]
Sets whether MF Assist (enlarged screen) will appear in a windowed
screen display or in a full screen display.
[MF Guide]
When you set the focus manually, an MF guide that allows you to check
the direction to achieve focus is displayed.
[Peaking] In-focus portions are highlighted when focus is being adjusted manually.
[Histogram] This allows you to set either to display or not display the histogram.
[Guide Line] This will set the pattern of guide lines displayed when taking a picture.
[Highlight]
When the Auto Review function is activated or when playing back, white
saturated areas appear blinking in black and white.
[Constant Preview]
You can check the effects of the chosen aperture and shutter speed on
the recording screen in Manual Exposure Mode.
[Expo.Meter] Set whether or not to display the exposure meter.
[Dial Guide] Set whether or not to display the dial operation guide.
[Rec Area]
This changes the angle of view during motion picture recording and
still picture recording.
[Remaining Disp.]
This will switch display between the number of recordable pictures and
available recording time.
[Auto Review] Displays a picture immediately after it is taken.
[Fn Button Set]
You can assign various recording and other functions to the function button.
DMC-GM1KP-VQT5D49_eng.book 37 ページ ２０１３年１０月２日 水曜日 午後６時５４分