28
Wi-Fi
VQT5D49 (ENG)
By pressing and holding [Wi-Fi], you can easily establish a connection.
1 Press and hold [Wi-Fi].
•
The information (SSID and password) required for directly
connecting your smartphone/tablet to this unit is displayed.
• Except for when connecting for the first time, the screen
from the previous connection is displayed.
2 Operate the smartphone/tablet.
1 Connect to a smartphone/tablet.
2 Select [ ] on the smartphone/tablet.
•
The recorded images are saved in the camera.
• Some settings are not available.
• The screen differs depending on the OS.
• When a high ambient temperature, continuous motion picture recording or other
conditions are causing the camera to overheat, [ ] flashes. If a message is displayed
after [ ] flashes, the camera will turn off automatically to protect itself. When this
happens, some functions will be disabled until the camera cools down.
1 Connect to a smartphone/tablet.
2 Select [ ] on a smartphone/tablet.
3 Drag an image.
•
If an image is touched, the picture will be played back in an
enlarged size.
• The function can be assigned to the top, bottom, left or
right according to your preference.
Connecting to a smartphone/tablet
Preparations:
•
Install the “Image App” in advance. (P27)
1 Turn on the Wi-Fi function.
2 Select the SSID that matches the one displayed on
the screen of this unit, and then enter the password.
3 Start “Image App”. (P27)
•
When the connection is complete, live images being
captured by the camera are displayed on the
smartphone/tablet.
Taking pictures via a smartphone/tablet (remote recording)
Saving images stored in the camera/Sending images in the camera to an SNS
DMC-GM1KP-VQT5D49_eng.book 28 ページ 2013年10月8日 火曜日 午後6時57分