Filter
Top Products
VQT1Z45
32
Preparation
•Use a battery with sufficient battery power or the AC adaptor (DMW-AC5PP; optional) and multi
conversion adaptor (DMW-MCA1; optional) when formatting. Do not turn the camera off during
formatting.
•If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
•If the card has been formatted on a PC or other equipment, format it on the camera again.
•It may take longer to format the built-in memory than the card.
•If the built-in memory or the card cannot be formatted, consult your nearest Service Center.
•If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
•In Playback Mode, [JITTER, SUBJ. MOVE DEMO.] cannot be displayed.
•Press [DISPLAY] to close [JITTER, SUBJ. MOVE DEMO.].
Press [MENU/SET] to close [AUTO DEMO].
•[JITTER, SUBJ. MOVE DEMO.] is an approximation.
•[AUTO DEMO] has no TV output capability even when it is in Playback Mode.
[VERSION DISP.]
It is possible to check which version of
firmware is on the camera.
[FORMAT]
The built-in memory or card is formatted. Formatting irretrievably
deletes all the data so check the data carefully before formatting.
~ [LANGUAGE]
Set the language displayed on the screen.
[ENGLISH]/[DEUTSCH]
¢
/[FRANÇAIS]
¢
/[ESPAÑOL]/
[ITALIANO]
¢
/[繁體中文]
¢
/[¢]
¢
¢ Not displayed on DMC-TS1P
[DEMO MODE]
The camera automatically detects jitter and the movement of the
subject and displays these on the indicator.
([JITTER, SUBJ. MOVE DEMO.])
The camera’s features are displayed as slide shows.
([AUTO DEMO])
[JITTER, SUBJ. MOVE DEMO.]
A Jitter detection demonstration
B Movement detection demonstration
[AUTO DEMO]:
[OFF]
[ON]
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: lumixconcierge@ca.panasonic.com
For USA and Puerto Rico assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo
DEMO
A
B
VQT1Z45~_eng.book 32 ページ ２００９年１月２８日 水曜日 午後９時３０分