Filter
Top Products
24 VQT4S89 (ENG)
GPS and map functions
■
Displaying the status and result of positioning
The icons that indicate the status and result of positioning will
appear on the LCD monitor. When positioning is successful,
camera will search the place name information (name of place and
landmark) inside its internal database and display it.
Place name
information
GPS reception icon
The same number of icons as the
number of the GPS satellites (from
which radio signals are successfully
received) stop flashing and light.
If the three bars of the GPS reception
icon do not light and the icon turns
off, it means that positioning was
unsuccessful.
Positioning
executed
successfully
(blue)
Positioning result icons
(Time elapsed after successful
positioning) (minute)
: Positioning failed. No location
information/place name information
available.
●
Positioning will take time in environments where it is difficult to
receive the signals from the GPS satellites. For details, refer
to “Using the GPS function to record the location of a picture”
(Owner’s Manual for advanced features).
●
Even if GPS reception is good, it will take approx. 2 to 3
minutes to successfully execute positioning under the following
conditions;
• When positioning is executed for the first time
• When [GPS Setting] was set to [OFF]
• When [Airplane Mode] was set to [ON] and the camera was
turned off
• When the battery was removed