Filter
Top Products
33
Playback
Clip management
Selecting clips
When performing operations on the thumbnail display screen, select the clip which will be the target of
these operations as follows.
1 Using [FF] or [REW], move the yellow frame
(cursor) to the target clip.
2 Press [STILL].
A bluish-green frame now appears at the clip
where the cursor is positioned to indicate that
the clip has been selected.
To release the selection
1 Move the cursor to the selected clip, and
press [STILL] again.
The selection is released.
• By repeating steps 1 and 2, you can select a multiple number of clips.
Deleting clips
You can delete unwanted clips from the P2 by proceeding as follows.
1 Display the thumbnail display screen.
2 Select the clips to be deleted.
3 Press [MENU].
4 Using [STOP], [PLAY] and [STILL], select
“OPERATION” – “DELETE”, and press
[STILL].
5 Select “YES”, and press [STILL].
6 When the completion message has
appeared, press “OK” ([STILL]).