Panasonic HC-902M Camcorder User Manual


 
13
VQT4R14
Charging and recording time
Charging/Recording time
Temperature: 25 oC (77 oF)/humidity: 60%RH
When using the viewfinder (times in parentheses are when using the LCD monitor)
* This will be the recording mode when the 3D Conversion Lens (optional) is attached.
These times are approximations.
The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as high/
low temperature.
The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning the unit on/off, moving the zoom lever etc.
Battery capacity indication
The battery capacity indication is displayed on the LCD monitor.
If there is less than 3 minutes remaining, then will become red. If the battery discharges,
then will flash. Recharge the battery or replace it with a fully charged battery.
Battery model number
[Voltage/Capacity
(minimum)]
Charging
time
Recording
mode
Maximum
continuous
recordable time
Actual
recordable
time
Supplied battery/
VW-VBN130 (optional)
[7.2 V/1250 mAh]
2h30min
[1080/60p],
[AVCHD 3D]*
1h20min
(1h15min)
50 min
(45 min)
[PH], [HA],
[HG]
1h25min
(1h15min)
50 min
(45 min)
[HE], [SbS 3D]*
1h25min
(1h15min)
55 min
(45 min)
[iFrame]
1h30min
(1h20min)
55 min
(45 min)
HC-X920&X920M&X910P&PC&PU_VQT4R14_mst.book 13 ページ 2012年12月27日 木曜日 午前10時44分