Filter
Top Products
85
VQT3Y04
∫ Dubbing using equipment without an SD card slot or a USB terminal,
or using a video device
You can dub by connecting an AV multi cable.
≥ Images are dubbed in standard quality.
≥ Use the AC adaptor to free you from worrying about the battery running down.
≥ Change the mode to .
1 Connect this unit to a video device and start playback on this unit.
2 Start recording on the connected device.
≥ To stop recording (dubbing), stop playback on this unit after stopping recording on the
recorder.
≥ If the date and time display and function indication are not wanted, cancel them before
dubbing. (l 40, 76)
≥ Turn off the operation icon by pressing the ENTER button when dubbing (l 37).
≥ For setting when connecting the AV multi cable, refer to page 77.
Dubbing in standard picture quality
Change the video input on the video
device and TV that this unit is
connected to.
≥ The channel set will differ depending on the
terminal to which the unit is connected.
≥ See the operating instructions of the video
device for details.
≥ Insert the plugs as far as they will go.
≥ Do not use any other AV multi cables except
the supplied one.
A AV multi cable (supplied)
If the dubbed images are played back on a wide-screen TV, the images may be stretched
vertically.
In this case, refer to the operating instruction of the device you are connecting to or read
the operating instructions of the wide-screen TV and set the aspect ratio to 16:9.
AV MULTI
HC-V100&V100MP_PC_PU_VQT3Y04_mst.book 85 ページ ２０１２年１月５日 木曜日 午前１０時２０分