Filter
Top Products
57
VQT4C31
This is for reducing the wind noise coming into the built-in microphones.
≥ Switch to Manual Mode. (l 59)
≥ This function’s default setting is [OFF].
≥ When switching to Intelligent Auto Mode, [WIND CUT] is set to [OFF], and the setting
cannot be changed.
≥ You may not see the full effect depending on the recording conditions.
When recording, the input level from the built-in microphones can be adjusted.
≥ Switch to Manual Mode. (l 59)
1 Select the menu.
2
(When [SETr ]/[SET] is selected)
Press 2/1 to adjust.
≥ Adjust the microphone input level so that the
last 2 bars of the gain value are not red.
(Otherwise, the sound is distorted.) Select a
lower setting for microphone input level.
3 Press the ENTER button to determine
the microphone input level and then
press the MENU button.
≥ (Microphone input level meter)
appears on the screen.
≥ In Intelligent Auto Mode this setting is set to [AUTO] and cannot be changed.
≥ The microphone input level meter shows the larger of the inputs from the 2 built-in
microphones.
≥ You cannot record with the audio completely muted.
[WIND CUT]
: [RECORD SETUP] # [WIND CUT] # [ON]
[MIC LEVEL]
: [RECORD SETUP] # [MIC LEVEL] # desired setting
[AUTO]: AGC is activated, and the recording level is adjusted
automatically.
[SETr ]: The desired recording level can be set.
AGC is activated, reducing noise.
[SET]: The desired recording level can be set.
You will be able to record natural-sounding audio.
A Left
B Right
C Microphone input level
HC-V10&V10M&V11MP9_PC_PU_VQT4C31_mst.book 57 ページ ２０１２年１月１３日 金曜日 午後８時２分