Filter
Top Products
13
VQT4C31
∫ Inserting the battery
Install the battery by inserting it in the
direction shown in the figure.
≥ Insert the battery until it clicks and locks.
∫ Charging the battery
The battery cannot be charged when the
power is on. Press the power button to turn
off the power.
A USB terminal
B To the AC outlet
1 Open the LCD monitor.
2 Connect the USB cable to the AC
adaptor.
≥ Check that the plug portion of the AC
adaptor is not loose or misaligned.
3 Plug the AC adaptor into the AC outlet.
4 Connect the USB cable to the unit.
≥ The status indicator C will flash red
for
approx. a 2 second time period (off for approx.
1 second, on for approx. 1 second),
indicating
that charging has begun.
It will turn off when the charging is
completed.
∫ Inserting/removing an SD card
≥ Check that the access lamp has gone off.
1) Open the LCD monitor.
2) Open the SD card cover and insert
(remove) the SD card into (from) the
card slot B.
≥ Face the label side C in the direction
shown in the illustration and press it
straight in as far as it will go.
≥ Press the center of the SD card and then
pull it straight out.
3) Securely close the SD card cover.
≥ Securely close it until it clicks.
Quick Guide
Access lamp [ACCESS] A
≥ When this unit is accessing the SD
card or built-in memory, the access
lamp lights up.
HC-V10&V10M&V11MP9_PC_PU_VQT4C31_mst.book 13 ページ ２０１２年１月１３日 金曜日 午後８時２分