Panasonic HC-V160 Camcorder User Manual


 
11
SQT0514
Connecting to a PC and charging.
Charge the unit if you do not have the AC adaptor handy.
A USB cable (supplied)
Insert the plugs as far as they will go.
Press the power button and turn the unit off.
(l 14)
Do not use any other AC adaptors except the supplied one.
We recommend using Panasonic batteries (l 9).
If you use other batteries, we cannot guarantee the quality of this product.
Do not heat or expose to flame.
Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with
doors and windows closed.
If you do not intend to use the unit for an extended period, disconnect the USB cable from the unit
for safety.
Charging may not be possible depending on the operating environment of the PC being used
(such as custom-made PC).
Charging will stop when turning the power of the PC off or forcing it into sleep mode. Charging will
start again when turning the power of the PC on again, or waking from sleep mode.
The unit will be charged if it is connected to a Panasonic Blu-ray disc recorder or DVD recorder
with a USB cable, even if the unit is turned off.
1 Turn the power of the PC on.
2 Connect the USB cable.
The status indicator B will flash red
with
approx. 2 seconds period (off for approx. 1
second, on for approx. 1 second),
indicating
that charging has begun.
It will turn off when the charging is
completed.
Do not use any other USB cables except the
supplied one. (Operation is not guaranteed
with any other USB cables.)
Always connect directly to a PC.
You cannot charge when the status indicator
flashes rapidly, or when it does not light at
all. Charge using the AC adaptor. (l 10)
It will take 2 or 3 times longer to charge
compared to when using the AC adaptor.
HC-V160_EB_EP_SQT0514_mst.book 11 ページ 2014年10月30日 木曜日 午後3時46分