Filter
Top Products
- 110 -
VIERA Link does not work. (Setting on this unit)
≥ Connect with a HDMI mini cable. (supplied or optional)*
(l 71)
≥ Set [VIERA Link] to [ON]. (l 74)
≥ Turn the unit off and then back on again.
* Use the HDMI mini cable that comes with this unit if supplied.
If it does not come with a HDMI mini cable, use a genuine
Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30:
optional). Check the accessories in the basic operating
instructions.
(Setting on other devices)
≥ If the TV input does not switch automatically, switch the input
using the TV remote control.
≥ Check the VIERA Link setting on the connected device.
≥ Please refer to the operating instructions of the connected
device.
Cannot copy scenes on
the SD card by connecting
to other equipment with
the USB cable.
≥ Other equipment might have not recognised the SD card.
Unplug the USB cable once, and reconnect it.
With a PC
Problem Check points
When connected by the
USB cable and charging
the battery, an error
message will appear on
the PC.
≥ After removing the USB cable, turn the unit on and connect
the cable again. The unit will be recognised by the PC. To
charge the battery, after safely removing the USB cable, turn
the unit off and connect the USB cable again.
When connected by the
USB cable, this unit is not
detected by the PC.
≥ After re-inserting the SD card into the unit, reconnect the
supplied USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment. (l 94, 102)
≥ Connect the supplied USB cable again after restarting the PC
and turning on this unit again.
When the USB cable is
disconnected, an error
message will appear on
the PC.
≥ To disconnect the USB cable safely, double-click the
icon in the task tray and follow the instructions on the screen.
Cannot see the PDF
operating instructions for
HD Writer LE 2.0.
≥ You will need Adobe Acrobat Reader 5.0 or later or Adobe
Reader 7.0 or later to read the PDF operating instructions for
HD Writer LE 2.0.
With other products
Problem Check points