Filter
Top Products
- 61 -
Highlight Playback [HC-V210]/[HC-V201]/[HC-V210M]
Part that was recognized as clearly recorded is extracted from multiple scenes, and it can be played
back in a short time with effects and music added.
≥ Highlight Playback cannot be performed for scenes in iFrame or MP4.
1 Select using the cursor button,
then press the ENTER button.
2 (Only when you would like to change the
settings)
Select the desired item and press the ENTER button.
3 Select [START] and press the ENTER button.
≥ When the [SCENE SETUP] in step 2 is not changed, it will playback with the last recorded date.
4 Select the playback operation. (l 29)
≥ When the playback is finished or stopped, the screen to select [REPLAY], [SELECT AGAIN] or
[EXIT] is displayed. Select the desired item and press the ENTER button.
≥ Playing back of all the scenes returns if the unit is turned off or the mode is changed.
≥ Slow-motion Playback and Frame-by-frame Playback are not possible.
∫ Scene setting
1 (Only when Highlight Playback is started from [ALL AVCHD])
Select the type of recording method for the scene you wish to play back
using the cursor button and press the ENTER button.
2 Select [SELECT DATE] or [SELECT SCENES] and press the ENTER button.
[SCENE SETUP]: Select the scene or date to be played back.
[PRIORITY SETUP]: Select the target to give priority to play back. (l 62)
[PLAYBACK TIME]: Select the time to play back. (l 62)
[EFFECT SETUP]: Select the effect for playback. (l 62)
[MUSIC SELECT]: Select the music to be played on playback. (l 62)
[1080/60p]/[1080/60i]