Filter
Top Products
24
VQT4Q73
If the Wi-Fi connection cannot be established
Problem Check points
It cannot connect
to the wireless
access point.
The wireless
access point is not
detected.
(General)
≥ Turn ON the wireless access point.
≥ Approach the wireless access point and reconnect.
≥ If it takes time to complete the connection, the Wi-Fi connection will be
aborted.
Reset the connection settings.
≥ Check how to connect to the wireless access point and how to set the
security settings.
≥ Make sure the wireless access point is registered in this unit.
≥ The device may be unable to locate the wireless access point due to
problems with the signal. Use [Manual Connection].
(Easy Connection)
≥ Make sure the wireless access point is in the correct WPS standby
mode.
≥ Make sure the PIN code has been correctly input.
(Manual Connection)
≥ Make sure the SSID and password have been correctly input.
≥ Check the Authentication method, Encryption type, and Encryption
key (Password).
Radio waves of the
wireless access
point get
disconnected.
≥ The condition may improved by moving the location or changing the
angle of the wireless access point.
≥ If you use another 2.4 GHz band device such as a microwave oven or
cordless telephone nearby, you may interrupt the signal. Keep a
sufficient distance from these types of devices.
HC-V720&V720M&V710P&PC_VQT4Q73_mst.book 24 ページ ２０１２年１２月７日 金曜日 午後５時５６分