21
(ENG) SQT0642
1 Rotate the Sub Camera.
≥ When you rotate the Sub camera from a position in the
range C (0e to approximately 30e) to a position in the
range D (approximately 30e to 270e), the Sub Window is
displayed on the LCD monitor.
≥ If the Sub Window does not appear, touch to
display it.
≥ (startup/disconnect icon for Wireless Twin Camera)
is disabled when using the Sub Camera.
2 Start recording.
≥ Rotate the Sub Camera to the desired position.
≥ Normally, hold this unit as shown in the illustration when
recording.
≥ Recording only with the Sub Camera is not possible.
≥ An image recorded with the Main Camera and the Sub Camera’s image displayed on the
Sub Window are recorded as a single scene or still picture. When you play back such a
scene or still picture, it is not possible to delete only the Sub Window image or hide it.
≥ The minimum focus distance of the Sub Camera is approximately 30cm.
Basic
Using the zoom
Zoom lever/Zoom button icons
T side:
Close-up recording (zoom in)
W side:
Wide-angle recording (zoom out)
≥ The zoom speed varies depending on the
range over which the zoom lever is moved.
A Zoom bar
The zoom bar is displayed during the zoom
operation.
T
W
6
W
T
6
W
T
T
W
HC-W570&W570MEP&EB-SQT0642_mst.book 21 ページ 2014年12月9日 火曜日 午後4時18分