Filter
Top Products
– 137 –
OPERATION ENGINEER SET UP menu
This menu is displayed when the > and keys are pressed together, and then the F9 key is
pressed.
FF13SET UP
F13
F12
F11
F10
F9
F8F7F6F5F4F3F2F1
Key
F1
F2–F7
F8
F9–F11
F12
F13
Key designation
EJECT LED
——
EXIT
——
ACCEL
KNEE
Description
Enables the lighting conditions of the EJECT button’s LED to be
selected.
MODE 1: The LED lights during the time starting when the VTR
is transferred to the eject mode until the cassette is
ejected or when cassette unloading is completed. (It
lights during the unloading period and in the EJECT
mode.)
MODE 2: The LED lights during the time starting when the VTR
is transferred to the eject mode until the cassette is
ejected. (It lights only during the unloading period.)
Returns the VTR to the ENGINEER SET UP menu screen.
Selects how far to accelerate the reel at a speed under multiple
speed selected by F13 (KNEE) during a FF or REW operation (in
the SHTL mode).
MAX: Maximum acceleration is applied at all times.
MIDDLE: Medium acceleration as far as the knee is applied.
(This is the default value.)
MIN: The acceleration as far as the knee is reduced.
≥When the MAX setting is selected, there is no knee due to the
maximum acceleration.
≥There is no knee when an L-size cassette is used.
Selects the multiple of the normal speed at which the reel speed
is to be transferred from the acceleration selected by F12
(ACCEL) to maximum acceleration during a FF or REW
operation (in the SHTL mode).
t8: 8knormal speed
t15: 15knormal speed
t20: 20knormal speed
t30: 30knormal speed