Filter
Top Products
E– 8
ENGLISH
Adjusting the Viewfinder
Mounting the Viewfinder
Stopper screw
Detaching the Viewfinder
Stopper screw
3.
Push the viewfinder down into place.
4.
Tighten the stopper screw firmly.
2.
Insert the plug into the connection jack of the viewfinder.
<Note>
Be sure to insert the plug all the way into the connection jack.
1.
Confirm that the POWER switch of the camera is “OFF”.
3.
Disconnect the connection jack from the viewfinder cable connector.
2.
Loosen the stopper screw and detach the viewfinder by pulling it straight up.
<Note>
Use both hands to detach the viewfinder. The viewfinder may not detach smoothly
with one hand, resulting in damage to the viewfinder.
1.
Confirm that the POWER switch of the camera is “OFF”.