Filter
Top Products
75
VQT1Z09
Microphone level
[AUTO]:
AGC is activated, and the
recording level is adjusted
automatically.
[SETr ]/[SET]:
The desired recording level
can be set.
AGC: Auto Gain Control
When recording, the input level from the built-in microphones
and the external microphone terminal can be adjusted.
≥ Change the mode to .
≥ The Intelligent Auto Mode is set to off. (l 47)
1 Select the menu. (l 33)
[RECORD SETUP] # [MIC LEVEL] # [SETr ]/[SET]
≥ It is possible to select the setting from the quick menu in Manual
Mode. (l 34) The microphone level returns to the setting
adjusted previously, and it cannot be set from the quick menu.
2 Touch / to adjust the microphone input
level.
A Center
B Front left
C Back left
D Front right
E Back right
F Microphone input level
≥ Touch to activate/disactivate AGC.
When AGC is activated, the icon is surrounded by yellow and the
amount of sound distortion can be reduced. When AGC is
disactivated, natural recording can be performed.
≥ A gain value for each of the 5 directions is displayed. (The input
level of the microphones cannot be set individually.)
≥ Adjust the microphone input level so that the last 2 bars of the
gain value are not red. (Otherwise, the sound is distorted.) Select
a lower setting for microphone input level.
3 Touch [ENTER] to determine the microphone
input level and then touch [EXIT].
G Microphone input level meter
Function Effect/Setting method
HDCSD300&HS300P-VQT1Z09_eng.book 75 ページ ２００９年１月２１日 水曜日 午前９時５３分