Filter
Top Products
67
VQT3J15
This will reduce the wind noise coming into the built-in microphones while maintaining the realism.
≥ Switch to Manual Mode. (l 72)
≥ This function’s default setting is [ON].
≥ When switching to Intelligent Auto Mode, [
WIND NOISE CANCELER
] is set to [ON], and the
setting cannot be changed.
≥ You may not see the full effect depending on the recording conditions.
Directivity of the microphone is synchronized with the zoom operation. Sounds near the front
of the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are
recorded more realistically if you zoom out (wide angle).
≥ Switch to Manual Mode. (l 72)
When recording, the input level from the built-in microphones can be adjusted.
≥ Switch to Manual Mode. (l 72)
1 Select the menu.
2
(When [SETr ]/[SET] is selected)
Touch / to adjust.
≥ Touch to activate/disactivate AGC.
When AGC is activated, the icon is surrounded by
yellow and the amount of sound distortion can be
reduced. When AGC is disactivated, natural recording
can be performed.
≥ Adjust the microphone input level so that the last
2 bars of the gain value are not red. (Otherwise, the
sound is distorted.) Select a lower setting for
microphone input level.
3 Touch [ENTER] to set the microphone input level and then touch [EXIT].
≥ (Microphone input level meter) appears on the screen.
[WIND NOISE CANCELER]
: [RECORD SETUP] # [WIND NOISE CANCELER] # [ON]
[ZOOM MIC]
: [RECORD SETUP] # [ZOOM MIC] # [ON]
[MIC LEVEL]
: [RECORD SETUP] # [MIC LEVEL] # desired setting
[AUTO]: AGC is activated, and the recording level is adjusted
automatically.
[SETr ]/[SET]: The desired recording level can be set.
MENU
MENU
MENU
A Left
B Right
C Microphone input level
HDC-SD80_TM80_HS80-P-VQT3J15_mst.book 67 ページ ２０１１年１月５日 水曜日 午後２時５１分