Filter
Top Products
82
VQT1T64
Editing
1
Deleting scenes/still pictures
¬Rotate the mode dial to select .
∫ Deleting multiple scenes/still pictures from the thumbnail display
1 Press the button while the
thumbnail view screen is
displayed.
2 Move the cursor button to select
[SELECT] or [ALL SCENES] and
press the cursor button.
≥ When [ALL SCENES] is selected, the following
scenes/still pictures except the protected
scenes/still pictures on the SD card will be
deleted. When the confirmation message
appears, select [YES], then press the cursor
button.
jWhen the play mode is set to :
All scenes or still pictures
jWhen the play mode is set to :
All the scenes or still pictures on the selected
date
3 (Only when [SELECT] is selected in step 2)
Select the scene/still picture to
be deleted, then press the cursor
button.
≥ To unselect the scene/still picture, press the
cursor button again.
≥ Up to 99 scenes can be selected to be deleted.
4 (Only when [SELECT] is selected in step 2)
Press the button.
≥ When the confirmation message appears,
select [YES], then press the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other scenes
Repeat steps 3-4.
Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the
contents before proceeding with delete.
0h00m00s0h
00
m
0
0s
0h00m00s
To delete by confirming images
being played back
Press the button while scenes or still
pictures to be deleted are being played back.
≥ When the confirmation message appears,
select [YES], then press the cursor button.
HDCSD100P-VQT1T64_ENG.book 82 ページ ２００８年７月１４日 月曜日 午後８時２分